C1505/C1506: Provides a rigid horizontal mounting platform for our Ø1.5" Post-Series
PSHA: Acts as a "nudger" for fine height adjustment
The C1505 and C1506 manually adjusted horizontal mounting platforms are a perfect alternative to our precision Lab Jacks when exact positioning is not required. Both platforms offer a generous array of 1/4"-20 (M6) mounting holes. When final positining is achieved the clamp locking mechanism is actuated with a 3/16" (5mm) Allen key or balldriver.

The PSHA Adjustable Height Collar offers increased control over positioning. The PSHA acts as a height "nudger" with a resolution of 0.025" (0.64mm) per revolution of the actuator ring.

Ø1.5" Adjustable Platform

This manually-adjusted platform is intended for applications that do not require the precision or flexibility of a laboratory jack. When locked, this platform provides a very stable 3" x 3" (75mm x 75mm) work surface at a fraction of the cost of a lab jack. Once the platform height has been established the post clamping mechanism is actuated with a 3/16" (5mm) Allen key or balldriver.